Condition: Used Used. Trench guns were produced with 20-inch barrels and had heat shields with unique anodized bayonet lugs attached to the front. Savage Stevens Model 520/620 Parts. [2] After the war, Stevens was sold to Savage Arms on 1 April 1920 and full production of civilian firearms resumed. This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm. During World War II, Stevens began producing both the Model 520A (renamed the Model 520-30) and the Model 620A (labeled as the Model 620) as trench guns, riot guns, and long-barreled training guns for the U.S. military. Guns made after this time could be unlocked after a dry fire with forward pressure on the slide. Click below to view the "j. stevens arms company 620" valuation report; including current used pricing and market data*. It is fitted with a walnut pump handle and buttstock with a black plastic buttplate. Stevens was sold to New England Westinghouse on 28 May 1915 and production of civilian firearms was greatly reduced. Stevens 520 Hammer New Style STV009 Factory part. ** Description: The Stevens Company introduced the Model 620-A in 1940, which was essentially a Mode 620 with an improved method of buttstock attachment that used a thru-bolt rather than the upper and lower tang and screws of the Model 620. [15] During this time it was sold as a store branded gun and under Stevens' budget line Riverside Arms. own to figure out what you want. [5] The Model 620 was internally similar to the Model 520 and was produced until 1939[6] when it was replaced by the Model 620A which ended production in 1955. service to the online gun buying experience that is unheard of. [4] Stevens also further modified the design when they introduced the streamlined Model 620 in 1927. Guns.com is built to be simple easily organized products, useful descriptions from experts, and support to guide you to the right choice. The wood is in fantastic condition, with no cracks or chips. The Model 620 was introduced in 1927 and is a streamlined version of the original 520. Civilian production of the Model 620A halted during World War II but continued afterward until 1955. [20], Stevens WWII M520-30 Trench Gun with M1917 Bayonet. WARNING! The much maligned Stevens 620 shotgun Mongo59 Oct 5, 2021 The #1 community for Gun Owners in Indiana Member Benefits: Fewer Ads! The safety was initially located inside the trigger housing just like the Model 520 but by 1929 it had been changed to a cross-bolt located behind the trigger. The serial number is U74103. $2.50. For sale is a Stevens 620 trench gun 12 ga. Slam fire shotgun. Description: Single brass bead front sight, 2 3/4" chambered and standard three line Stevens address on the left side of the barrel. JavaScript is disabled. another state. Without the trigger tang, a flat main spring had no place to attach and the 620A had a shortened trigger housing using a coil main spring. When Savage Arms purchased Stevens in 1920,[3] the Model 520 was updated, incorporating several design changes that were emerging prior to 1916. By 1928 the No. 2023 Rock Island Auction Company. of a company that is committed to your satisfaction. These include a relocated slide release button, moved from the left side of the receiver to the left side of the trigger plate, and a redesigned inertial slide release, incorporated into the design of the trigger plate. [13] It was followed in 1930 by a 20 gauge Model 520.[14]. Learn how and when to remove these template messages, Learn how and when to remove this template message, https://en.wikipedia.org/w/index.php?title=Stevens_Model_520/620&oldid=1025248083, World War I infantry weapons of the United States, World War II firearms of the United States, Articles needing additional references from December 2015, All articles needing additional references, Articles lacking reliable references from December 2015, Articles with multiple maintenance issues, Short description is different from Wikidata, Creative Commons Attribution-ShareAlike License 3.0, J. Stevens Arms & Tool Co (1909-1916), J. Stevens Arms Co/Savage Arms Co (1916-1955), Model 520 (1909-1939), Model 620 (1927-1939), Model 520A (1940-1947), Model 620A (1940-1955), Models 522, 525, 530, 535, 621 Ranger 30, 31, 102.25 JC Higgins 102.25 Western Field 30, 35, 60, This page was last edited on 26 May 2021, at 14:59. The first Stevens 520 appeared in Stevens' 1909 Catalog No. The 520A continued to be sold as a store branded gun and under Stevens' budget line Riverside Arms (stamped Model 520). https://www.indianagunowners.com/threads/classifieds-new-online-payment-guidelines-rules-paypal-venmo-zelle-etc.511734/, FFL Alert from ATF - Beech Grove FFL Burglarized, NWI INDIANA GUN OWNERS. Stevens creates high quality, dependable semi-automatic, pump action, over/under, and single shot shotguns. Total wartime production of all Model 520-30 shotguns was 33,306 and all Model 620 shotguns was 12,174. Trench guns were produced with 20 inch barrels (cylinder bore) and had a heat shield with a unique pinkish anodized bayonet lug attached to the front of the barrel (late war examples had a small "S" stamped on the left side). Sort by: Show Available. Someone would find something bad to say about them and others would chime in and then even people who did not even have a dog in the fight found their selves cheering for their demise. The No. Come join the discussion about optics, hunting, gunsmithing, styles, reviews, accessories, classifieds, and more! Many online gun sales actually take away from your local Supposedly several examples were made but no known examples survive. You must log in or register to reply here. Skip to main content. In the mean time I did take off the barrel and magazine tube. The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916. This is highly desirable and highly sought US WWII Military trench shotgun. Any idea where I can find this information? Stevens (Chicopee Falls, Mass. [16], The redesigned Model 520A was closely related to the Model 520, utilizing the same takedown action and locking breech block. customers to the absolute best of our abilities. community. For more information: www.p65warnings.ca.gov. We will not ship any products out of the U.S. Alaska & Hawaii may incur additional shipping charges. The buttstock and pump handle are both in near excellent condition with a nice original dark oil finished walnut with light handling marks on the right side of the pump handle, and the lower rear sides of the buttstock by the sling swivel and in front of the buttplate and also around the very edges of the pistol grip. The receiver lost the distinctive double hump and had a flat top and squared-off back end. Hmm. The Savage-Stevens model 620 shotgun is a manually operated, slide (pump) action shotgun. THIS IS A STEVENS BROWNING made by J. STEVENS ARMS CO. MODEL 620 12GA PUMP SHOTGUN SHE WILL CHAMBER 2-3/4" 12GA ROUNDS THE BLUE FINISH IS ALL BUT GONE THE WOOD STOCK AND FOREND SHOWS YEARS OF WEAR WITH CRACKS AND POORLY REFINISHED. be complicated. [2] After the war, Stevens was sold to Savage Arms on 1 April 1920 and full production of civilian firearms resumed. $13.00. The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916. THE BLUE FINISH IS ABOUT 40% AND SOMEONE ENGRAVED "BEB" (SHOWN) IN FRONT OF THE LOAD GATE ON THE BOTTOM. Required fields are marked *. A "Trench Gun" version (20" barrel) of the M620 existed for wartime military procurement, also fitted with a heat shield and bayonet lug. No matter how beat up and misused they were, they all still functioned properly. Trench guns were also fitted with a sling swivel in the stock. In 1928 the first sub-gauge Model 520 was introduced when a 16 gauge option was offered. Plain jane guns that were usually sold through Sears & Roebuck, Montgomery Wards and other low priced stores. the store. Gather price information about this shotgun and many others before you buy, sell or trade. Credit cards 3%(no personal checks internet sales). The revolver was 44 caliber and the cylinder could be removed for reloading, one of the first of its kind. This was done so that all the markings could be read with the heat shield installed. In 1928, the first sub-gauge Model 520 was introduced when a 16 gauge option was offered. Kingston, NY 12401, 2023 Numrich Gun Parts Corporation. Great deals on STEVENS Shotgun Parts. The numbers all match. The left side of the receiver is stamped with a "P" firing proof over the Ordnance Corp Shell and Flame proof followed by "MODEL 620" with the "U.S." farther back on the receiver. your community AND if they have it in stock, you can pick your gun up Stevens 520/620 Breech Block Retaining Screw STV003 Factory part. 16 gauge (2 3/4"), s/n U79208, 28" plain barrel, EXCELLENT BORE, choked Modified, brass bead front sight, original blue over entire gun has faded exhibiting normal edge wear, pistol grip stock retains original finish in 85-90% condition with normal . You can narrow it down somewhat by the features and markings on the guns. Guns.com is dedicated to helping you choose the perfect fit for your concealed carry needs by providing a selection of guns that are ready for the task. Website by Hudson, This product is no longer available, however, Stevens 520, 520A, 620, 620A Parts Layout w/ List, Lifter, 12 & 16 Ga., Used Factory Original, Lifter Pawl, 12 & 16 Ga., Used Factory Original, Lifter Pawl, 20 Ga., Used Factory Original, Locking Bolt, 12 Ga., Used Factory Original, Slide, 12 Ga. (Has Hole For Plunger & Spring), Slide, 20 Ga. (Has Hole For Plunger & Spring), Breech Bolt, 12 Ga., Used Factory Original, Extractor Spring, Left, Used Factory Original, Extractor Spring, Right, New Factory Original, Extractor Spring, Right, Used Factory Original, Hammer Pin, 12 & 16 Ga., New Factory Original, Hammer Pin, 12 & 16 Ga., Used Factory Original, Hammer Pin, 20 Ga., Used Factory Original, Magazine Follower, 12 Ga., Metal, Used Factory Original, Magazine Follower, 20 Ga., Metal, Used Factory Original, Magazine Plug, 12 Ga., Used Factory Original, Magazine Plug, 16 Ga., Used Factory Original, Magazine Follower Spring, 12 Ga., New Reproduction (Fitting Req'd), Magazine Spring, 16 & 20 Ga., New Reproduction (Fitting Req'd), Ejector Screw, New Factory Original (Threaded 5-40), Ejector Screw, New Factory Original (Threaded 5-48), Cartridge Stop Screw, New Factory Original (2 Req'd), Lifter Pawl Spring, Used Factory Original, Trigger Guard Pin, 20 Ga., Used Factory Original, Trigger Guard Screw, 12 & 16 Ga., New Factory Original, Trigger Guard Screw, 20 Ga., New Factory Original, Firing Pin Stop Pin, 12 Ga., New Factory Original (.83" OAL), Lifter Pawl Plunger, New Factory Original, Magazine Nut, 12 Ga., Used Factory Original, Magazine Plug Screw, 12 Ga., 12-40 TPI New, Magazine Tube, 12 & 16 Ga., New Factory Original, Magazine Tube, 12 & 16 Ga., Used Factory Original, Magazine Tube, 20 Ga., Used Factory Original, Operating Handle Bar Collar, 12 Ga., Front, New Factory Original, Operating Handle Bar Collar, Front, 12 Ga., New Factory Original, Operating Handle Collar, 16 Ga., Rear, Used Factory Original (ID 1.01"), Forend, 12 Ga., Checkered, Used Factory Original (Wood Only), Forend, 12 Ga., Plain Walnut, New Factory Original, Forend, 12 Ga., Walnut, 16-Groove, New Factory Original, Forend, 20 Ga., Checkered, Used Factory Original, Operating Handle Bar Assembly, 12 Ga., Original, Sear & Slide Lock Pin, Used Factory Original, Slide Lock Release Button, Used Factory Original, Slide Lock Release Spring, New Reproduction, Breech Block Retaining Screw, Used Factory Original, Lifter Screw, 12 Ga., Used Factory Original (2 Req'd), Lifter Screw, 20 Ga., Used Factory Original, Operating Handle Bar, 12 Ga., Used Factory Original, Slide Lock Release, Late Style, New Factory Original, Slide Lock Release, Late Style, Used Factory Original, Slide Lock Release, 12 & 16 Ga., Used Factory Original, Slide Lock Release, Used Factory Original, Sear, Dual Hook Style, Used Factory Original, Buttplate, New Reproduction (5" x 1-11/16"; Fitting Req'd), Buttplate Screw, New Factory Original (2 Req'd), Buttplate Screw, New Reproduction (2 Req'd), Trigger Guard, 12 Ga., Used Factory Original, Safety Plunger Screw, Used Factory Original, Barrel, 12 Ga., 19", Improved Choke, Used, Barrel, 12 Ga., 19-1/2", Improved Choke, Used, Barrel, 12 Ga., 19-3/4", Improved Choke, Used, Barrel, 12 Ga., 21", Improved Choke, Used, Barrel, 12 Ga., 22-1/2", Improved Choke, Used, Barrel, 12 Ga., 23-3/4", Improved Choke, Used, Barrel, 12 Ga., 27 1/2", w/ Adjustable Choke, Used, Barrel, 12 Ga., 27-3/4", Full Choke, Used (w/ Solid Vent Rib), Barrel, 12 Ga., 27-3/4", Modified Choke, w/ Solid Vent Rib, Used, Barrel, 12 Ga., 30", Full Choke, Blued, Used Factory Original, Barrel, 16 Ga., 19", Full Choke, Used (w/ Front Sight), Barrel, 16 Ga., 21-1/4", Full Choke, Used, Barrel, 16 Ga., 22-1/2", Full Choke, w/ Solid Vent Rib, Used, Barrel, 16 Ga., 27-1/2", Used (w/ Lyman Cutts Compensator & Full Choke), Barrel, 16 Ga., 28", Full Choke, Solid Vent Rib, Used, Barrel, 20 Ga., 22-1/4", Adjustable Choke, Used, Barrel, 20 Ga., 26", Full Choke, Blued, New Factory Original (2-3/4" Chamber), Barrel, 20 Ga., 28", Adj PolyChoke, Used Factory (2-3/4" Chamber; Markings Vary), Barrel, 20 Ga., 28", Full Choke, Blued, New Factory Original (2-3/4" Chamber), Barrel, 20 Ga., 28", w/ Compensator & Adj Savage Super Choke (2-3/4" Chamber), Bead Sight, White, New (.130" Diameter, 3-56 Threads; Threads Up To Base), Breech Block Assembly, 20 Ga., Used Factory Original, Hammer Spacer Collar, Used Factory Original, Lifter Assembly, 12 & 16 Ga., Used Factory Original, Lifter Assembly, 16 Ga., Used Factory Original, Lifter Assembly, 20 Ga., Used Factory Original, Operating Handle Bar Rivet, New Factory Original, Slide Assembly, 12 & 16 Ga., Used Factory Original (w/ Plunger & Spring), Slide Assembly, 20 Ga., Used Factory Original (w/ Plunger & Spring), Slide Lock Assembly, Used Factory Original, Trigger Guard, 20 Ga., Used (Tang is 2.3" w/ 2 Holes; w/ Crossbolt Safety). [5] The Model 620 was internally similar to the Model 520 and was produced until 1939[6] when it was replaced by the Model 620A which ended production in 1955. RIAC believes that this website is accessible to the widest possible audience pursuant to the guidelines of the Americans with Disability Act. IMMEDIATELY its how business should be done. : GunBroker is the largest seller of Pump Action Shotguns Shotguns Guns & Firearms All: 983667730. The foregrip is ringed and uniform in size. Savage Stevens model 620 16 gauge shotgun bolt assembly and lift complete. Civilian Model 520A production resumed after WWII, again as store branded guns, and continued until 1948.[18]. The No. Visit Lyon. The shotgun has an upgraded rear Williams adjustable site. The long barreled training guns were marked in the same manner as riot guns and were mainly used for aerial gunnery training. SHE WILL CHAMBER 2-3/4" 16GA ROUNDS. Beretta released its PX4 Storm line in the 1990s without much fanfare, but it since has developed something of a cult-like following. The Model 520 last appeared in a Stevens sales publication in 1928 and 1929 (Catalog #57)[5] but remained in full production until 1939. The 520A was never shown in a Stevens sales publication, it only appeared in Sears & Roebuck and Montgomery Wards catalogs and in Stevens component parts catalogs (the only source where it was identified as a 520A). Lever Action Metallic Silhouette a fun and popular shooting sport, and Winchesters Model 94 in .22 Winchester Magnum is a natural choice for this competition. The left side of the breech and lower left front of the receiver are marked with "P/flaming ordnance bomb", with "MODEL 620" and "U.S." on the left of the receiver. The second group was numbered from just under #17000 to around #33000." Your email address will not be published. Ammunition is fed from an under-barrel tubular magazine. Call first on inventory. The TORO (Taurus Optics Ready Option) is touted as the first-ever optics-ready revolver, and being a sucker for red dots and handguns, I had to try it. BARREL - 28-INCH - MODIFIED CHOKE. The trigger housing was retained with three screws and the safety was a lever located inside the trigger guard in front of the trigger. $8.60. Stevens Shotguns for Sale. The J. Stevens Arms Co. serial number info is long gone and even the Savage Arms Corp. historian can't tell you. Taurus Defender 856 TORO Brings Optic-Ready Performance to a Revolver. For no reason that makes any sense, I put a few pre WWII Sevens single shots and Stevens SXS shotguns in my collection. Shipping: $65.00 (or FREE in-store pick up!) Gauge/ Cal. Initially, the 620 was only offered in 12 gauge but a 16 gauge followed in 1928 and a 20 gauge was introduced in 1930. Stevens Model 620 pump action shotgun, Savage Arms Co. production, no visible serial number, circa pre 1945, 90% to 95% old reblue, a few handling marks with all lettering still sharp and clear, no rust or pitting, 30" barrel 2-3/4 chamber with excellent bore, original checkered walnut stock and foreend in very good to excellent condition with no cracks or repairs, also has original butplate, nice tight action that feed and ejects perfectly as with all Browning designs, the old Stevens model 520 & 620 shotguns were one of the best Browning patent shotguns that withheld the test of time for strength and durability, C&R-OK. A hard to find World War Two shotgun that would make a great addition to any U.S. Military collection! This particular gun is a textbook example, with all the . The 620A used a long draw blot through the end of the stock and did away with the receiver and trigger plate tangs used on the 620. 57, in 12-gauge only. $199.95. For a better experience, please enable JavaScript in your browser before proceeding. STEVENS 620, 520 & RANGER 30 - 12GA. Available records indicate that just over 12,000 Model 620A shotguns of all types were purchased during the war. Stevens 520/620 Extractor Left STV006 Factory part. Shotgun. All Rights Reserved. The action was designed to only unlock after firing or with the use of the slide release and not by dry firing like many modern shotguns. This is highly desirable and highly sought US WWII Military trench shotgun. This one was the later improved version of the original 520 Trench shotguns that had the redesigned "rounded back" receiver, similar to the Model 12 trench shotguns, making this a much stronger and safer trench shotgun. Model 520. The Centre is part of a particularly dynamic ecosystem, within the second French . on your local stores shelf, most retailers drop ship it from a warehouse in [4] Stevens also further modified the design when they introduced the streamlined Model 620 in 1927. Excellent with 90% plus of the original blue finish overall with light edge and high spot wear overall with some light thinning on the front left sides of the receiver with thinning on the magazine tube from where the action was cycled. . The barrel has the correct WWII Stevens six-hole heat shield/bayonet lug that has the correct purplish tint to the metal due to its alloy construction, with the capital "S" stamped on the left side of the bayonet lug. 4/25/19 - This is a very rarely encountered Stevens Savage Model 620 trench shotgun, made as a part of US military procurement during WWII. The gun was known for its reliability and accuracy and both Union and Confederate soldiers [], Be the first to review Stevens Model 620 12 GA. When you purchase through links on our site, we may earn an affiliate commission, which supports our community. Call on most early rifle/handgun ammunition/calibers and older handgun magazines. This war time production riot shotgun features a checkered slide handle and pistol grip stock with a Stevens black plastic checkered buttplate. **Buyer must contact us within 48 hrs. overall gun is in good shape. Around this time the inertial slide release blocks are removed and replaced with a spring that provided forward pressure on the slide release. 620s had the lever safety inside the trigger guard. It has a round slide release knob on the left side of the receiver, a visible breach locking bolt on the top of the receiver, and base models have a rounded pistol grip on the buttstock. I wanted a project for refinishing, so this is a good piece. Browning eventually sold this design to the J Stevens Arms & Tool Company in Chicopee Falls MA. What about a Stevenson's savage 20ga model 620 where I the serial number and worth of it. Does not have a barrel shroud. 1. Buttstock is very fine with some light handling marks, scuffing, and crisp grip checkering. overall gun is in good shape. Unlike its M520 counterpart, this was a hammerless model, very much like Winchester M12. A Manual safety was made in the form of a cross-bolt button, located behind the trigger. If you already have access, please Log In. Supposedly, several examples were made but no known examples survive. 620s had the lever safety inside the trigger guard. All model 520s were only offered in 12 gauge until 1928. Antique (Pre-1899) Rifles - Flintlock Misc, Antique (Pre-1899) Rifles - Matchlock/Wheellock Misc, Century Arms International (CAI) - Rifles, Muzzleloading Modern & Replica Rifles (perc), Winchester Rifles - Modern Bolt/Auto/Single, Winchester Rifles - Pre-1899 Bolt/Single Shot, Century Arms International (CAI) - Pistols, Colt Automatic Pistols (.25, .32, & .380 cal), Colt Single Action Revolvers - Modern (22 Cal. This item has a 28 barrel with a fixed choke (Modified) and checkered wood stocks. Savage Arms Corp. 1947 to 1954, and they began calling it the Model 620. Stay in the know. Today we are looking at a new product from Taurus: the Defender 856 TORO. [10], Around 1918, Stevens provided a 520 trench gun prototype to the US military for service in World War I. Best Offer: Make offer. Articles incorporating text from Wikipedia, World War I infantry weapons of the United States, World War II firearms of the United States, http://www.mosinnagant.net/ussr/US-Mosin-Nagants.asp, Do Not Sell or Share My Personal Information, J. Stevens Arms & Tool Co (1909-1916), J. Stevens Arms Co/Savage Arms Co (1916-1955), Model 520 (1909-1939), Model 620 (1927-1939), Model 520A (1940-1947), Model 620A (1940-1955), Models 522, 525, 530, 535, 621 Ranger 30, 31, 102.25 JC Higgins 102.25 Western Field 30, 35, 60. I just bought a Stevens 620 today. A forum community dedicated to Shotgun owners and enthusiasts including the Remington, Beretta, and Mossberg shotguns brands. This Model 620 features a full-choke 30" barrel with a good bore, a wood stock, and is chambered for 2 3/4" shells. 620 was introduced in 1927, and manufactured into the 1950s. Directions. The 620A used a long draw bolt through the end of the stock and did away with the receiver and trigger plate tangs used on the 620. Trench guns were produced with 20-inch barrels (cylinder bore) and had heat shields with unique pinkish anodized bayonet lugs attached to the front (late war examples had a small "S" stamped on the left side). . For sale is a Stevens 620 trench gun 12 ga. Slam fire shotgun. Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas Find Savage/Springfield/Stevens 620A parts and accessories today with Numrich Gun Parts. The Model 520 last appeared in a Stevens sales publication in 1928 and 1929 (Catalog #57)[5] but remained in full production until 1939. Stevens Model 620 pump action shotgun, Savage Arms Co. production, no visible serial number, circa pre 1945, 90% to 95% old reblue, a few handling marks with all lettering still sharp and clear, no rust or pitting, 30" barrel 2-3/4 chamber with excellent bore, original checkered walnut stock and foreend in very good to excellent condition with no We'rebringing a level of Kind of "poor ol' farmer" grade guns. John Browning filed a patent for a hammerless shotgun with a unique take-down barrel and locking breech block on 10 Jul 1903, it was approved on 7 Feb 1905 and along with a separate 27 Aug 1907 patent, that applied to the connection between the slide arm and the fore end, became what would be the Stevens, Browning Patent: 7 Feb 1905 Take-Down Feature (M520-30). The blueing shows scratches and some wear in the finish. Most websites are poorly . [4][8] It is easily recognizable by its "humpback" double receiver. The Stevens 520 began life in 1903 as a submitted patent by one John Moses Browning, which detailed a new shotgun with an internal hammer, locking-breech block, and a take-down design. The Stevens Model 520 was a pump-action shotgun developed by John Browning and originally manufactured by the J Stevens Arms & Tool Company between 1909 and 1916. Model 520. 1 (208) 602-6027; info@oldarmsofidaho.com; Products search. The action was designed to only unlock after firing or with use of the slide release and not by dry firing like many modern shotguns. Click here for more information. This was done so that all the markings could be read with the heat shield installed. Excellent, retaining 90% plus original blue finish, with some light wear on the magazine tube, areas of brown patina, and sharp markings. Class: Curio & Relic Long Gun. The Model 620 was introduced in 1927 and is a streamlined version of the . RIAC believes that this website is accessible to the widest possible audience pursuant to the guidelines of the Americans with Disability Act. The earliest No. To confuse the issue, most of the later guns were marked 'Model 620' A much smaller quantity of Model 620As as compared to the Model 520-30 was acquired during World War II. The left of the barrel side is marked: "PROOF TESTED-12 GAUGE/-2 3/4 INCH CHAMBER-". Most notably was a redesign of the cartridge stop in 1933 and the relocation of the safety, from inside the trigger guard to behind the trigger in 1937. The shotgun went through several design changes during this period. There were other models including a Model 522 trap gun and the 525, 530, and 535 with increasing levels of engraving and stock quality (some straight grip) and foregrips. Single brass bead front sight, 2 3/4" chambered and standard three line Stevens address on the left side of the barrel. During World War II, Stevens began producing both the Model 520A (renamed the Model 520-30) and the Model 620A (labeled as the Model 620) as trench guns, riot guns, and long-barreled training guns for the US military. Model 520 production ended in 1939 and it was replaced by the improved Model 520A in 1940. Let's review what makes this soft-shooting carry gun so special. 2023 Rock Island Auction Company.
Probasics Walker Brake Cable,
Is Rbw Entertainment A Good Company,
Why Does My Boyfriend Smell Like A Baby,
Articles S